Mold-Vac Application CriteriaSend Core/Cavity plan & section views to: data@caeservices.com Questions: Please call us at (630) 425.6100 Quotation Requirements Project 1st Stage Fill Time Total Cycle Time Part Volume (in3) Cavitation Material Customer Information Company * Address Address 1 Address 2 City State/Province Zip/Postal Code Country Contact * Position Phone * (###) ### #### Cell (###) ### #### Email * Product Overview The Mold-Vac is designed to eliminate part burns caused as a direct result of gas & air entrapment. Additionally, the patented blowback feature cleans vented ejector and core pins after each cycle, thereby reducing tooling maintenance by eliminating residue build-up. Are your rejects caused as a direct result of gas or air entrapment? Yes No Is the part burn or short shot opposite the gate? Yes No Are you sacrificing cycle time to allow the air and gas to vent? Yes No Have you tried slowing down the fill time (e.g. 1 to 1.5 seconds) to allow for additional time for the air and gas to vent? Yes No If yes, any improvements? Yes No Not Sure Have you changed the vent depth to try to improve venting? Yes No If yes, what happened? Are you experiencing problems with keeping vented pins clean or free of residue build-up? Yes No Current reject rate for this project? In your opinion, what do you think is the root cause of the problem? Is this problem of low, medium, or high priority? Low Medium High When does this problem need to be resolved? Immediately 2-3 Months Any experience with Mold-Vac or vacuum systems? Yes No How did you hear of us? Web Search Advertisement Referral Other Thank you!
